XP95 heat detector 90°C (CS)
The XP95 heat detector CS is included in the BOSEC B-9072-FD954 - EN54-13 certificate of the MD2400(L) analogue addressable fire detection system.
The XP95 heat detector is composed of a white, flame-retardant polycarbonate housing. The XP95 heat detector is equipped with a red LED, which is lit in case of an alarm, and a unique addressing mechanism, the XPert card. The XPert card is placed in the base of the detector, while the base is completely free of electronics.
The XP95 heat detector monitors the temperature by means of a single thermistor, which generates an output voltage proportional to the external air temperature.
The alarm value of the XP95 heat detector CS is set at 90°C.
- ideal for environments that are dirty of smoky under normal circumstances
- unaffected by wind or atmospheric pressure
|Description||XP95 heat detector 90°C (CS)|
|Apollo Part No||55000-401APO|
|BOSEC Certificate||B-9077-FD-K 601|
|Certificate of Constancy of Performance||2531-CPR-CSP10916 - EN54-5:2000/A1:2002|
|Materials||Housing: white polycarbonate V-0 (UL94) - Terminals: nickel plated stainless steel|
|Dimensions (Ø x H)||100x42mm|
|Detection principle||Single NTC thermistor|
|Supply voltage||17 - 28Vdc|
|Alarm LED current||4mA|
|Alarm indicator||1 red LED|
|Terminal functions||+R & -R: connection remote indicator|
|Remote LED current||Maximum 4mA@5Vdc|
|Operating temperature||-20°C to +70°C|
|Humidity||0% to 95% RH (no condensation or icing)|
|Effect of wind speed||Unaffected by wind|
|Supply wiring||Two wire supply - polarity insensitive|