XP95 manual call point red with isolator
The XP95 red manual call point with short circuit isolator is in accordance with European Standards EN54-11:2001/A1:2005 & EN54-17:2005 and is included in the BOSEC B-9072-FD-954 EN54-13 certificate of the MD2400 & MD2400L fire detection system.
The XP95 manual call point is made of an impact-resistant red plastic (ABS) housing and is used for manual signalling when determining a fire hazard. At rest, a switch is held down by an unbreakable flexi-element. By pressing this flexi-element, the switch is released and a contact closes.
The XP95 manual call point is equipped with a built-in short-circuit isolator on both the incoming and outgoing cables and a LED lights up red in case of a fire alarm and yellow in case of a short-circuit.
Specifications are typical at 24V, +25°C and 50% RH unless otherwise stated.
"Temporarily not available - contact Limotec for more info"
Technical details
| Description | XP95 manual call point red with isolator |
|---|---|
| Code | 085201A |
| Apollo Part No | 55100-908APO |
| Certificate of Constancy of Performance | 2531-CPR-CSP11013 |
| Materials | Red polycarbonate |
| Mounting | Surface mounting |
| Dimensions (LxWxD) | 93x89x59,5mm |
| Supply voltage | 17 - 28Vdc |
| Quiescent current | 100µA@24Vdc |
| Alarm current | 4mA@24Vdc |
| Operating temperature | -20°C to +60°C |
| IP rating | IP45 |
| Humidity | 0% to 95% RH (no condensation or icing) |
| Terminals | Screw terminals up to 2.5mm² |
| Wiring | 2-wire - polarity sensitive |
| Variant | 085202A: XP95 manual call point red with isolator and protective lid |