XP95 Looptester
The XP95 Looptester offers the possibility of fine-tuning a finished XP95 loop by checking the cabling for interruptions or possible incorrect connections and double or wrong addressing of the connected XP95 devices.
The XP95 Looptester simulates the XP95 protocol so that the MD2400 or MD2400L should not be installed before checking the cabling of the XP95 loop.
The XP95 Looptester is equipped with an internal battery so that no 230Vac mains voltage needs to be present for checking the XP95 loop.
The XP95 Looptester is supplied with a battery charger.
Technical details
| Description | XP95 Looptester |
|---|---|
| Code | 085900 |
| Materials housing | ABS |
| Dimensions (HxWxD) | 200x120x37mm |
| IP rating | IP50 |
| Internal batteries | 7.2V 5800mAh Li-ion |
| Battery charger | Primary 230Vac 0.2A - Secondary 8.4Vdc 1A |
| Autonomy | 8 hours |
| Connection terminals | 4 insulated screw terminals for the connection of the XP95 loop |