Telephone : 056 650 660 | E-mail:
XP95 DIN-rail 4-channel input unit

XP95 DIN-rail 4-channel input unit

The XP95 4-channel input unit monitors and reports the status of maximum 4 voltage-free contacts. This module is mounted on a 35mm DIN-rail and is also available in a plastic housing.

The XP95 4-channel input unit can monitor both NO and NC contacts, whereby, using EOL resistors, the wiring betweenthe input unit and the contact is checked for short circuits and open circuits.

Using a jumper setting, the number of connected contacts can be selected. The number of connected contacts automatically determines the number of addresses reserved by the XP95 4-channel input unit.

The address of the first input is set using a DIP-switch. The following inputs are automatically assigned to the chronologically following addresses.

Technical details

Description XP95 DIN-rail 4-channel input unit
Code 085320
Dimensions (HxWxD) 80x105x60mm
Supply voltage 17 - 28Vdc
Number of inputs 4
Type of input 4x NO contact or 4x NC contact (voltage-free)
EOL resistor 470K
Alarm resistor 47K
Quiescent current 4mA
Alarm current 4.5mA
Operating temperature 0°C to +50°C
Humidity 0% to 95% (no condensation or icing)
Supply wiring Shielded cable placed is a separate cable duct
Cable distance Maximum 1 meter between XP95 4-channel input unit and contact
Variant 085323: XP95 4-channel input unit in housing 150x175x80mm IP55