MD2400 interface ESPA 4.4.4 protocol
The MD2400 interface ESPA 4.4.4 protocol is a protocol convertor used to send detector and group names to a paging system or to a DECT system.
The MD2400 interface ESPA 4.4.4 protocol is mounted on a standard 35mm DIN rail and can be connected directly to the I/O data bus of a MD2400 or MD2400L fire alarm control panel.
Possibility to set a weekly cyclic test.
For each detector, individual messages for fire alarm, pre-alarm and fault are transmitted.
The following can be programmed per message:
- priority code
- call number
- any additional text message
- adoption of the name per detector of the MD2400 or MD2400L control panel
- length, composition and number of repetitions of the message
- time between 2 messages
|Description||MD2400 interface ESPA 4.4.4 protocol|
|Protocol||ESPA 4.4.4 according to ISO1745|
|Communication||Standard: RS232 9600baud No Parity - 8 bit - 1 stop bit|
|Supply voltage||24Vdc maximum 100mA|
|Variant||243310: MD2400 interface ESPA 4.4.4 protocol in housing 175x180x80mm|