MD2400L - Analogue addressable fire alarm control panel
The MD2400L, analogue addressable fire detection and fire warning system for buildings, has been designed in accordance with European Standards EN54-2:1997/A1:2006 and EN54-4:1997/A1:2002/A2:2006 and is BOSEC B-9072-FD-954 EN54-13 certified.
The MD2400L fire alarm control panel has a maximum capacity of 3 XP95 detection loops. A maximum of 126 addressable components can be connected to each loop. Communication with the connected fire detectors and devices is based on the digital XP95 protocol.
The various components of the MD2400L fire alarm control panel are mounted in a synthetic housing with a transparent door. The MD2400L central processing unit includes the main processor card, up to 3 XP95 loop interface cards, the relay card with 10 relays, the system's basic power supply and the Touch screen. The front of the MD2400L fire alarm control panel is equipped with a built-in 7'' colour Touch screen for operating the control panel and for displaying the messages of the system.
The MD2400L fire alarm control panel is equipped as standard with 10 relays, of which 2 monitored outputs, 1 Fail-safe relay for "Common fault", 1 relay for "Fault power supply" and 6 freely programmable relays with potential free change-over contacts.
The housing of the MD2400L fire alarm control offers space for two batteries with a maximum capacity of 12V 12Ah.
The MD2400L fire alarm control panel is programmed using a PC configuration software.
Technical details
| Description | MD2400L - Analogue addressable fire alarm control panel |
|---|---|
| Code | 244001 |
| BOSEC EN54-13 certificate | B-9072-FD-954 |
| Certificate of Constancy of Performance | 1134-CPR-077 |
| Declaration of Performance | DoP-MD2400L-2013 |
| Materials & colour housing | Self-extinguishing plastic - RAL7035 |
| Dimensions (HxWxD) | 655x410x140mm |
| IP rating | IP65 |
| Display and controls | Built-in 7'' colour Touch screen |
| Mains input voltage | 230Vac 50Hz |
| Built-in power supply | 27V 1A+0,6A |
| Batteries - Type | Minimum 2x 12V 7Ah - Maximum 2x 12V 12Ah - Genesis |
| Number of loops | 1, 2 or 3 loops - maximum 126 addresses per loop |
| Relay outputs | - 2 monitored circuits (EOL resistor 330Ω + diode per output) - maximum 15 ROSHNI RoLP sounders per output (EN54-13) - 8 potential free change-over contacts (0,5A/30Vdc) of which 1 Fail-safe for 'Common fault' and 1 for 'Fault power supply' |
| Maximum load to be connected in quiescent condition (I Max A) | 500mA@27Vdc (including the consumption of the control panel, the fire detectors, manual call points, I/O units and other devices) |
| Maximum load to be connected in alarm condition (I Max B) | 1A@27Vdc (including the consumption of the control panel, the fire detectors, manual call points, I/O units,sounders and other devices) |
| Quiescent current | - Basic system current consumption: 219mA (with 1 loop interface card) - Current consumption per additional loop interface card: 21mA - Current consumption per additional relay card: 32mA |
| Alarm current | 417mA with 1 loop interface card and with factory setting of the built-in relay card |
| Maximum load of the auxiliary power supply output | 500mA (take into account the maximum load to connect to the control panel in quiescent and in alarm condition) |
| Standard communication buses of the main processor RABBIT4000 | - RS485 loop bus (XP95 detection loops) - RS232 bus (communication with PC) - RS485 EAM bus (communication with graphical software) |
| Built-in options with requirements according to EN54-2 | - Outputs to fire alarm devices (output type C) (§ 7.8) - Delays to outputs (§ 7.11) - Fault signals from points (§ 8.3) - Disablement of addressable points (§ 9.5) - Test condition (§10.1, § 10.2 and § 10.3) |
| Other technical data | We refer to document HD2400LN05A available for inspection at the manufacturer |
| Notified body | ANPI:1134 |