|| Sounders ||
ROSHNI RoLP red sounder with deep base – IP65 - Art. 900052 -
- Materials: ABS
- Dimensions (H x Ø): 93 x 93mm
- Nimber of selectable tones: 32
- Volume control: 10dB
- Supply voltage: 18 - 24Vdc
- Current consumption : 16mA@24Vdc (tone 3)
- Sound output: 102dB(A)@1m (tone 3)
- Operating temperature: -25°C to +70°
- Humidity: 0 to 93% RH (no condensation)
EN54-13 CERTIFICATE :
MD2400 : B-9072-FD-1049 | MD2400L : B-9072-FD-954
STOCK KEEPING ARTICLE
ROSHNI RoLP red sounder with shallow base – IP54 - Art. 900053 -
- Materials: ABS
- Dimensions(H x Ø): 63 x 93mm
- Nimber of selectable tones: 32
- Volume control: 10dB
- Supply voltage: 18 - 24Vdc
- Current consumption : 16mA@24Vdc (tone 3)
- Sound output: 102dB(A)@1m (tone 3)
- Operating temperature: -25°C to +70°
- Humidity : 0 to 93% RH (no condensation)
EN54-13 CERTIFICATE :
MD2400 : B-9072-FD-1049 | MD2400L : B-9072-FD-954
STOCK KEEPING ARTICLE
ROSHNI RoLP white sounder with deeo base – IP65 - Art. 900052W -
- Materials: ABS
- Dimensions (H x Ø): 93 x 93mm
- Nimber of selectable tones: 32
- Volume control: 10db
- Supply voltage: 18 - 24Vdc
- Current consumption : 16mA@24Vdc (tone 3)
- Sound output: 102dB(A)@1m (tone 3)
- Operating temperature: -25°C to +70°
- Humidity: 0 to 93% RH (no condensation)
STOCK KEEPING ARTICLE
Interface for ROSHNI sounder suitable for 1 circuit in loop form including DC/DC converter - Art. 900052_INT_PS -
- Using the interface for ROSHNI sounder, the cabling for the ROHSNI RoLP conventional sounder can be laid out according to the principle of a loop circuit.
- The interface for ROSHNI sounder is always used in combination with an isolator (order code 900052_ISOL) per sounder.
- This solution makes it possible to cover multiple fire compartments with a single sounder circuit in a loop configuration, and the regulations for function retention of the analogue addressable detection circuits in a loop configuration can be applied.
- The interface for ROSHNI sounder is built into the C.I.E. MD2400 and is suitable for DIN rail mounting.
- A DC/DC converter provides a constant supply voltage of 28Vdc.
- The input of the interface for ROSHNI sounders is connected to a monitored output of the C.I.E. MD2400 relay card.
- Maximum 25 ROSHNI sounder per interface
- Cabling: minimum 2x 1,5mm²
- Maximum distance between two short-circuit insulators: 87 metres
SUITABLE FOR : | MD2400 |
EN54-13 CERTIFICAAT: MD2400 - B-9072-FD-954
ON ORDER
Interface for ROSHNI sounder suitable for 2 circuits in loop form including DC/DC converter for DIN rail
- Art. 900052_2INT_PS -
- Using the interface for ROSHNI sounders, the cabling for the ROHSNI RoLP conventional sounder can be laid out according to the principle of a loop circuit.
- The interface for ROSHNI sounder is always used in combination with an isolator (order code 900052_ISOL) per sounder.
- This solution makes it possible to cover multiple fire compartments with a single sounder circuit in a loop configuration, and the regulations for function retention of the analogue addressable detection circuits in a loop configuration can be applied.
- The interface is equipped with two control circuits, making it possible to connect two loop-shaped circuits from ROHSNI Rolp sounders per interface.
- The interface for ROSHNI sounders is built into the C.I.E. MD2400 and is suitable for DIN rail mounting.
- A DC/DC converter provides a constant supply voltage of 28Vdc.
- The input of each control circuit for ROSHNI sounders is connected to a separately monitored output of the C.I.E. MD2400 relay board.
- Up to 2x 25 ROSHNI sounders per loop controller
- Cabling: minimum 2x 1,5mm²
- Maximum distance between two short-circuit insulators: 87 metres
SUITABLE FOR : | MD2400 |
EN54-13 CERTIFICAAT: MD2400 - B-9072-FD-954
ON ORDER
Short circuit isolator for ROSHNI sounders
- Art. 900052_ISOL -
- Always use in combination with a loop controller
- All sounders connected are equipped with a short-circuit isolator for ROSHNI sounders
- The short circuit isolator should be fixed into the sounder
- Cabling: minimum 2x 1,5mm²
- Maximum distance between 2 isolators: 87 metres
SUITABLE FOR : | MD2400 |
EN54-13 CERTIFICAAT: MD2400 - B-9072-FD-954
STOCK KEEPING ARTICLE
DB5 Intrinsically Safe sounder red – IP65
- Art. 900084 -
- Suitable for intrinsically safe applications where zone 0, 1 or 2 conditions exist
- Materials: ABS
- Dimensions (D x Ø): 93 x 102 mm
- Supply voltage : 24Vdc, to be used in combination with an MTL7728+ Zener barrier
- Current: maximum 14mA
- Sound output: 92 ± 3dB @ 1m
- Number of selectable tones: 26
- Operating temperature: -20°C tot +55°
ON ORDER
|| Sounder beacons ||
RoLP LX WALL – red flash in red housing – IP65 - Art. LX0921RR -
- ROSHNI RoLP red sounder not included and to be provided separately
- For wall mounting up to a maximum height of 2.4 metres
- Dimensions (H x W x D): 135 x 95 x 95mm
- Supply voltage: 18 - 24Vdc
- Current: maximum 25mA (exluding sounder current)
- Coverage: 7,5m of 135m³ (High Power Mode)
- Flash rate: 1Hz (High Power Mode)
- Polarity: dependant
- Operating temperature: -25°C to +70°
EN54-13 CERTIFICATE : MD2400/MD2400L : B-9072-FD-954
STOCK KEEPING ARTICLE
Outdoor sounder red 24Vdc with flash including battery 12V 2,3Ah – IP33C
- Art. 900056C -
- Always use in combination with an external EN54-4 certified power supply
- Materials: external housing in ABS and internal cover in metal
- Dimensions (H x W x D): 327 x 216 X 117mm
- Supply voltage: 22 – 28Vdc
- Quiescent current: 40mA@24Vdc
- Maximum consumption when charging battery: 500mA@24Vdc
- Alarm current: 850mA@24Vdc
- Maximum peak current: 1050mA@24Vdc
- GeluidSound outputssterkte: 102dB(A)@1m
- Operating temperature: -25°C to +70°
STOCK KEEPING ARTICLE
|| Sounders high output ||
SYMPHONI HO red sounder high output – IP21C - Art. 900080 -
- Materials: ABS
- Dimensions (H x Ø): 96 x 108mm
- Nimber of selectable tones: 32
- Volume control: 20db
- Supply voltage: 18 - 24Vdc
- Current consumption: 240mA@24Vdc (ton 3)
- Sound output: 114dB(A)@1m (ton3)
- Operating temperature: -10°C tot +55°
- Polarity: dependant
STOCK KEEPING ARTICLE
SYMPHONI HO red sounder high output – IP66 - Art. 900080IP66 -
- Materials: ABS
- Dimensions (H x Ø): 110 x 110mm
- Nimber of selectable tones: 32
- Volume control: 20db
- Supply voltage: 18 - 24Vdc
- Current consumption: 240mA@24Vdc (ton 3)
- Sound output: 114dB(A)@1m (toon3)
- Operating temperature: -25°C to +70°
- Polarity: dependant
STOCK KEEPING ARTICLE
|| Beacons ||
SOLISTA LX WALL – red flash in red housing – IP65 - Art. LX0930RR -
- For wall mounting up to a maximum height of 2.4 metres
- Dimensions (H x Ø): 93 x 66mm
- Supply voltage : 9 – 60Vdc
- Current : maximum 25mA (depending on setting)
- Coverage: 7,5m of 135m³ (High Power Mode)
- Flash rate: 1Hz (High Power Mode)
- Polarity: dependant
- Operating temperature: -25°C to +70°
EN54-13 CERTIFICATE : MD2400/MD2400L : B-9072-FD-954
STOCK KEEPING ARTICLE
|| Other ||
FULLEON red remote indicator – IP23
- Art. EU3001 -
- Materials: ABS
- Dimensions (H x W x D): 87 x 87 X 48mm
- Colour: Housing: white – Lens: red
- Supply voltage: 5 – 30Vdc
- Current consumption: 7,2mA with 3K6 resistor in series
- Resistor: 0R, 1K5 or 3K6 (adjustable)
- Operating temperature: -20°C to +60°
STOCK KEEPING ARTICLE
ASKARI COMPACT red sounder – IP21C
- Art. 900048AR -
- Materials: ABS
- Dimensions (H x X x D): 86 x 86 x 52 mm
- Nimber of selectable tones: 32
- Volume control: 10db
- Supply voltage: 18 - 24Vdc
- Current comsumption: 18mA@24Vdc (toon 3)
- Sound output: 97dB(A)@1m (toon3)
- Operating temperature: -10°C tot +55°
ON ORDER
