XP95 optical smoke detector - Art. 085003 -

• Optical smoke detector without base
• Detection principle : scattered light
• Supply voltage : 17 - 28Vdc
• Quiescent current : 340µA
  
• Supply Wiring : Two wire supply, polarity insensitive
  

TOP

XP95 multisensor detector - Art. 085801 -

• Multisensor detector without base
• Detection principle : smoke: scattered light - heat: temperature-sensitive resistance
• Supply voltage : 17 - 28Vdc
• Quiescent current : 500µA
  
• Supply Wiring : Two wire supply, polarity insensitive
  

TOP

XP95 heat detector 90°C (CS)
- Art. 085005 -

• Heat detector 90°C (CS) without base
• Detection principle : single NTC thermistor
• Supply voltage : 17 - 28Vdc
• Quiescent current : 300µA
  
• Supply Wiring : Two wire supply, polarity insensitive
  

TOP

XP95 isolating base - Art. 085010 -

• XP95 isolating base
• Supply voltage : 17 – 28Vdc
• Current consumption : 43μA@28Vdc
• Supply wiring : 2 wire supply, polarity sensitive
  

TOP

XPERT 7 base - Art. 085006 -

• XPERT 7 base
• XPERT 7 adressing
• Locking feature to prevent unauthorised detector removal

TOP

XPERT 7 base - deep​ - Art. 085016 -

• XPERT 7 base — deep
• Enables surface wiring
• XPERT 7 adressing
• Locking feature to prevent unauthorised detector removal 
  

TOP

XPERT 7 base — heated​ - Art. 085011 -

• XPERT 7 base — heated
• For use in cold environments in combination with a deckhead mounting box (Art. 900939A)
  
• Supply voltage : 24Vdc
• Current consumption : 125mA@24Vdc
• Supply wiring : 4 wire supply, polarity sensitive 

TOP

Discovery Sounder Base – DIN tone - Isolating​ - Art. 085409 -

• Base for XP95 detector with built-in sounder and isolator
• Supply voltage : 17 – 28Vdc
• Quiescent current consumption: 200µA@24Vdc
• Current consumption sounder operating: 5mA@24Vdc
• Sounder output high volume setting: 65 – 84db(A) (complies with EN54-3)
• Sounder output low volume setting: 50 to 65dB(A)

TOP

Deckhead Mounting Box​ - Art. 900939A -

• Deckhead Mounting Box with cable gland entries
• Protects bases from the ingress of water or other liquids
• Suitable for a variety of Apollo bases

TOP

Conduit Box​ - Art. 900933 -

• Surface mount box for lateral cable entry
• For use when detectors are installed on uneven surfaces
• Ensure correct fit
• Improves reliability
• Ensures that the mounting tags on the base are not over-tightened

TOP

XP95 Duct detector housing ​- Art. 085060 -

• Operates at airspeeds of 0.5m/s to 20m/s
• Standard sampling tube supplied for ducts up to 540mm
• Transparent cover to view detector LED
• Equipped with XP95 detector base
• Optional sampling tube lengths available for ducts up to 3000mm  
  

TOP

 Downloads

 Downloads 900005